2012 Symposium

Ozone Generator Trouble Shooting and Service - John Gaudaur, Ozone Water Systems
Monday, May 21
10:30 - 11:10 am

Pump Curves and Pump Sizing - Benjamin Ashe, MDM Inc.
Monday, May 21
10:30 - 11:10 am

Valve Automation. Process Control Via Control Element & Actuators – Including Valve & Actuator Integration Assembly & Maintenance - Ed Cellucci, Plastomatic, Inc.
Monday, May 21
10:30 - 11:10 am

Proper Calibration and Maintenance for DO, pH and Conductivity Sensors - Darrin Honious, Yellow Springs Instrument Co.
Monday, May 21
10:30 - 11:10 am

Ozone Generator Trouble Shooting and Service - John Gaudaur, Ozone Water Systems
Monday, May 21
11:20 am - 12:00

Pump Curves and Pump Sizing - Benjamin Ashe, MDM Inc.
Monday, May 21
11:20 am - 12:00

Valve Automation. Process Control Via Control Element & Actuators – Including Valve & Actuator Integration Assembly & Maintenance - Ed Cellucci, Plastomatic, Inc.
Monday, May 21
11:20 am - 12:00

Workshop is full.

Proper Calibration and Maintenance for DO, pH and Conductivity Sensors - Darrin Honious, Yellow Springs Instrument Co.
Monday, May 21
11:20 am - 12:00

Air Dryer and Oxygen Concentrator Service - John Gaudaur, Ozone Water Systems
Monday, May 21
1:00 - 1:40 pm

Pump Curves and Pump Sizing - Benjamin Ashe, MDM Inc.
Monday, May 21
1:00 - 1:40 pm

Pump Maintenance - William Parry, Met-Pro Global Pump Solutions
Monday, May 21
1:00 - 1:40 pm

Proper Calibration and Maintenance for DO, pH and Conductivity Sensors - Darrin Honious, Yellow Springs Instrument Co.
Monday, May 21
1:00 - 1:40 pm

Air Dryer and Oxygen Concentrator Service - John Gaudaur, Ozone Water Systems
Monday, May 21
1:50 - 2:30 pm

Pump Curves and Pump Sizing - Benjamin Ashe, MDM Inc.
Monday, May 21
1:50 - 2:30 pm

Pump Maintenance - William Parry, Met-Pro Global Pump Solutions
Monday, May 21
1:50 - 2:30 pm

Proper Calibration and Maintenance for DO, pH and Conductivity Sensors - Darrin Honious, Yellow Springs Instrument Co.
Monday, May 21
1:50 - 2:30 pm

Fusion Piping Systems -- Brandon Baker, Ryan Herco.
Monday, May 21
3:30 - 4:30 pm

PVC Solvent Cementing Pressurized Piping [ASME B31.3] - Newell Rollins, Harrington Plastics; Terry McPherson, IPS Corporation.
Tuesday, May 22
8:30 - 10:00 am

Workshop is full.

ORP and pH Sensor Maintenance and Calibration – Dave Vollaire, GF Signet
Tuesday, May 22
10:30 - 11:10 am

Installation Tips for Ball and Butterfly Valves - Dave Hurley & Joe Poniatowski, Asahi America
Tuesday, May 22
10:30 - 11:10 am

Pump Life-Cycle Cost Analysis & Energy Savings - William Parry, Met-Pro Global Pump Solutions
Tuesday, May 22
10:30 - 11:10 am

Heat Exchanger Preventative Maintenance – Rick Murray, Delta Hydronics LLC
Tuesday, May 22
10:30 - 11:10 am

ORP and pH Sensor Maintenance and Calibration – Dave Vollaire, GF Signet
Tuesday, May 22
11:20 am - 12:00

Installation Tips for Ball and Butterfly Valves - Dave Hurley & Joe Poniatowski, Asahi America
Tuesday, May 22
11:20 am - 12:00

Pump Life-Cycle Cost Analysis & Energy Savings - William Parry, Met-Pro Global Pump Solutions
Tuesday, May 22
11:20 am - 12:00

Heat Exchanger Preventative Maintenance – Rick Murray, Delta Hydronics LLC
Tuesday, May 22
11:20 am - 12:00

Workshop is full.

Flow Meters - Sensor Maintenance and Choosing the Right Sensor – Dave Vollaire, GF Signet
Tuesday, May 22
1:00 - 1:40 pm

Ultraviolet Sterilizer Maintenance - Steve Zimmer, Emperor Aquatics, Inc.
Tuesday, May 22
1:00 - 1:40 pm

Pump Seals - Darrell Martin & Mike Dell, Advanced Sealing International
Tuesday, May 22
1:00 - 1:40 pm

Heat Exchanger Preventative Maintenance – Rick Murray, Delta Hydronics LLC
Tuesday, May 22
1:00 - 1:40 pm

Flow Meters - Sensor Maintenance and Choosing the Right Sensor – Dave Vollaire, GF Signet
Tuesday, May 22
1:50 - 2:30 pm

Ultraviolet Sterilizer Maintenance - Steve Zimmer, Emperor Aquatics, Inc.
Tuesday, May 22
1:50 - 2:30 pm

Pump Seals - Darrell Martin & Mike Dell, Advanced Sealing International
Tuesday, May 22
1:50 - 2:30 pm

Heat Exchanger Preventative Maintenance – Rick Murray, Delta Hydronics LLC
Tuesday, May 22
1:50 - 2:30 pm

Fusion Piping Systems -- Brandon Baker, Ryan Herco.
Tuesday, May 22
3:30 - 4:30 pm

PVC Solvent Cementing Pressurized Piping [ASME B31.3] - Newell Rollins, Harrington Plastics; Terry McPherson, IPS Corporation.
Wednesday, May 23
8:30 - 10:00 am

Workshop is full.

Fusion Piping Systems -- Brandon Baker, Ryan Herco.
Wednesday, May 23
11:00 am - 12:00